 |
| Oxygen plasma: |
max200 |
|
| Description: |
● 200 amp．30 kw power output delivers
heavy-duty cutting capacity up to 2 inches
f50 mm)thick on most metals；typical
cutting speeds greatly exceed oxyfuel or
other methods．
● 1 00％duty cycle at full power keeps
you cutting—all day long．
● Adjustable power output from 40 10
200 amps lets the operator precisely
match power to cutting requirements．
● A state-of-the-art transistorized power
supply maintains constant output current
regardless Of variations in input voltages
or torch-to-work distances，ensuring
clean，square cuts throughout the cutting
range． |
|
|
|
Powermax specifications |
Capacity
Mild steel |
Dross free |
25 mm (1") |
Production (pierce) |
25 mm (1") |
Severance (edge starts) |
50 mm (2") |
Stainless steel |
Production (pierce) |
25 mm (1") |
Severance (edge starts) |
50 mm (2") |
Aluminum |
Production (pierce) |
25 mm (1") |
Severance (edge starts) |
50 mm (2") |
Speed*
(Mild steel) |
Optimum quality |
12 mm (1/2") |
CNC Extension |
2159 mm/m (85 ipm) |
Cut angle |
ISO 9013 range** |
4-5 |
Weldability |
|
Ready to weld |
Process gases
by material(Plasma/shield) |
Mild steel |
Air/Air, O2/Air ,
N2/CO2. |
Stainless steel |
Air/Air, O2/Air,N2/CO2 |
| Aluminum |
xAir/Air, N2/Air,N2/CO2, H35/N2 |
Not all processes
available for all
materials |
40-200
beveling (200) |
|
|
 |
| |
|
| Air plasma: |
Powermax systems |
|
| Description: |
Entry-level single gas (air or nitrogen) cutting systems, great for duct cutting, pipe cut-off, beveling and robotic 3-D cutting.
|
|
Download the system brochure : |
|
Powermax1000 system brochure (PDF 325 K)
Powermax1250 system brochure (PDF 307 K) |
Powermax1650 system brochure (PDF 347 K) |
| |
Powermax specifications |
|
|
Powermax1000 |
Powermax1250 |
Powermax1650 |
Capacity
Mild steel |
Dross free |
n/a |
n/a |
n/a |
Production (pierce) |
10 mm (3/8") |
10 mm (3/8") |
12 mm (1/2") |
Severance (edge starts) |
32 mm (1-1/4") |
38 mm (1-1/2") |
44 mm(1-3/4") |
Stainless steel |
Production (pierce) |
10 mm (3/8") |
10 mm (3/8") |
12 mm (1/2") |
Severance (edge starts) |
32 mm (1-1/4") |
38 mm (1-1/2") |
44 mm (1-3/4") |
Aluminum |
Production (pierce) |
10 mm (3/8") |
10 mm (3/8") |
12 mm (1/2") |
Severance (edge starts) |
32 mm (1-1/4") |
38 mm (1-1/2") |
44 mm (1-3/4") |
Speed*
(Mild steel) |
Optimum quality |
10 mm (3/8") |
12 mm (1/2") |
12 mm (1/2") |
CNC Extension |
1041 mm/m
(41 ipm) |
991 mm/m
(39 ipm) |
1447 mm/m
(57 ipm) |
Cut angle |
ISO 9013 range** |
5 |
5 |
5 |
Weldability |
|
Preparation required |
Preparation required |
Preparation required |
Process gases
by material(Plasma/shield) |
Mild steel |
Air |
Air |
Air |
Stainless steel |
Air, N2 |
Air, N2 |
Air, N2 |
| Aluminum |
Air, N2 |
Air, N2 |
Air, N2 |
Process amps |
Not all processes
available for all |
20-60 |
25-8 |
30-100 |
|
|
| |
| The types of Kjellberg cutting machine which can be used with Steeltailor P are: |
 |
| |
|
| Name: |
Plasma Cutting Unit CutFire 50i&90i |
|
| Description: |
Plasma cutting unit for cutting of all electrically conductive materials up to 10 mm (recommended cutting range) and up max. 15 mm (maximum cut) with an air cooled plasma machine torch
with plasma gas Air
together with cutting tables and other guiding systems
|
|
| Download Brochure CutFire |
Technical data plasma power source |
| |
- |
CutFire 50i |
CutFire 90i |
Mains voltage |
(V) |
3x 400 (50/60 Hz) |
3x 400 (50/60 Hz) |
Fuse, slow |
(A) |
T16 |
T32 |
Connecting power(100%d.c.) |
(kVA) |
10.4 |
22.1 |
Protection class |
- |
IP 23 |
IP 23 |
Insulation class |
- |
F |
F |
Open circuit voltage |
(V) |
240(DC) |
240(DC) |
Cutting current |
(A) |
20 - 70 (stepless) |
20 - 120 (stepless) |
Cutting current
at 100% d.c.
at 35% d.c. |
(A) |
50/70 |
90/120 |
Cutting thickness
- maximum
- recommended |
(mm) |
15 (material depending)
10 (material depending)
|
20 (material depending)
15 (material depending)
|
Stationary piercing |
(mm) |
10 (material depending) |
15 (material depending) |
Weight |
(kg) |
22 |
24 |
Dimensions L x W x H |
(mm) |
560 x 325 x 410 |
560 x 325 x 410 |
|
| |
Technical data plasma machine torch Flash 90G/L |
Mains voltage |
- |
Air, 0,5 MPa (5 bar) |
3x 400 (50/60 Hz) |
Cooling |
- |
Air |
T32 |
Air consumption
- quality cut
- power cut |
(l/min) |
195
265
|
22.1 |
Pressure
- quality cut
- power cut |
(bar / MPa) |
5,0 / 0,5
6,5 / 0,65
|
IP 23 |
Ignition |
- |
High voltage |
F |
Shaft diameter |
mm |
36 |
240(DC) |
Weight (6m/12m long) |
kg |
3.5 / 6.5 |
20 - 120 (stepless) |
|
| |
![]() |
